Description

Note :It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness. 1.Need Canbus Decoder/ Resistor: These bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder （not included）to cancel the error. When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP. 2.Warm Tips: Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep .etc they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix.If you need it, you can buy it locally or contact customer service to get a discount to buy it. Specifications: --Plug Type: 9005 + H11 + 5202 High Low Beam + Foglight --Power(per set): 40W@high beam, 40W@ low beam --Lamp beads: CSP lamp beads --Quantity: 6pcs --Luminous Flux: 18000lm/set(9000lm/bulb) --Operating Voltage: DC 9-32V(fit 12V,24V vehicles) --Color Temperature: 6000K Pure White --IP67 rated water and dust seal,over 50000hrs lifetime --Beam Angle: 270 degree@low beam,360 degree@high beam --Material: Aviation 6063 aluminum profile --Operating Temperature: -40-80 degree Celsius --Usage: Headlight + Foglight Feature: --(6pcs/set)9005+H11+5202 High Low Beam headlight conversion kit --Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light --Xenon white light reflect road paint/signs better to show clearer road situation during night driving --270 degree low beam angle with cut-off line,will not dazzle oncoming traffic --All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature --Built-in constant current CPU, instant full brightness without start-up relay --It can directly replace the traditional tungsten bulb of the original car; --The has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers --There is no delay when the lights up, while the traditional tungsten bulb has a delay of 0.3 seconds. -- has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel! --It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions -- car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A. --All-in-one aluminum profile as heat conduction system, 360 degree heat radiating --High speed mute fan(12000R/Min),high Air flow for faster cooling rate --No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns! --When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the chip to avoid damage. The has positive and negative polarity, if it is not bright, turn the direction and reinstall; Package Included: 2 pcs 9005 High power Headlight High Beam Bulbs 2 pcs H11 High power Headlight Low Beam Bulbs 2 pcs 5202/H16 High power Fog Light bulbs The old and new boxes will be sent randomly Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Be sure to turn off the ignition and remove the key. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.