Description

Specifications: Model: H13/9008 light Source Model: LED Chip,4-side leds,super bright Power: 120w/Set & 60w/bulb Lumen:10000LM Operating voltage:DC 9-30V Beam Type:High beam & Low beam Material: Aluminum PCB and PA66+30% GF Plastic Beam Angle:360° Color Temperature: 6500K Cool White Lifespan:over 50000h Working Temperature: -40 -- +80 Centigrade Waterproof rate: IP 68 Plug for this listing: H13/9008 Plug High Low Beam LED Headlight Bulbs Kit Connector Type:Plug and Play Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam Features: High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 9-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen; The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel! It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A. Packed Include: 2x 9008/H13 High Power LED Headlights Bulbs Install Caution 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. 8.Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system) On Aug 13, 2024 at 20:58:12 PDT, seller added the following information: On Aug 16, 2024 at 12:11:15 PDT, seller added the following information: On Aug 21, 2024 at 20:51:28 PDT, seller added the following information: